Wages (gates) for high-profile roofing material EHN-P, EHN-A XDP

EH clamp allows you to tightly combine the window with a high-profile roof covering, such as: tiles or high-profile coverings. It can be used for roof coverings with a profile height of up to 90 mm.

It is standardly manufactured for installation of one window in the plane of the roof. It is also made in a version for combining windows horizontally, vertically and block.
The collar is made of the same type, for installing a window at a depth of N (+3 cm) - the EHN-P collar variant.

Mounting range from 15° to 90°.

EHN-A XDP cuff consists of a standard sealing sleeve EHN-A (1) and an isolation kit XDP. XDP includes a vapor-permeable collar (2) and heat-insulating material (3), which is made of natural sheep wool treated with an antiseptic.

Prices and sizes Where to buy?

Collar design

The collar consists of four main elements (a lower element, two side elements and an upper element). A long and wide elastic apron, completing the lower element, allows you to easily combine the edge with a high-profile roof covering. It has a plastic mass glued on the inside for gluing the edge to the roof covering, which ensures a tight connection. The burt has lateral sealing wedges that provide protection against dust, leaves and snow. It is also equipped with elements intended for the removal of water vapor condensate from the film of the primary ceiling outside the window.

Collar elements

1 - the lower element of the collar with an elastic apron 220 mm long
2 - side element
3 - upper
collar element 4 - metal hooks for fixation
collar 5 - ditches for drainage
6 - sealing wedges