Gutter holder PROFiL metal. small 90 red

It is intended for fastening the gutter to the roof structure and the task of the necessary slope of the drainage system as a whole. It is made of high-quality steel with a layer of galvanization of 275 g/m2, which allows to prevent the manifestations of corrosion during the period of operation. Reinforced from all sides, the design allows you to hold a weight of up to 100 kg with one holder. Hooks for fastening the gutter on both sides make it possible to easily mount the system and, if necessary, replace the gutter without difficulty. A small metal gutter bracket should be chosen if the house has a front board. Each metal bracket of the gutter system is attached to the front board with 3 roofing self-tapping screws. The distance between cuttings should be no more than 50 cm or 20 cm to the edge of the front board. In order to prevent water stagnation in the system and to ensure effective drainage of rainwater, during installation work, you should organize the slope of the gutter in the direction of water discharge through the drain funnel. The slope should be 3-5 mm per 1 linear meter.