Gutter holder PROFiL layer. 130 brick

It is intended for fastening the gutter to the roof structure and organizing the necessary slope of the drainage system as a whole. It is made of high-quality polyvinyl chloride by the monoextrusion method, which prevents color loss during the service life. The use of exclusively primary raw materials prevents cracking of the system during sudden temperature changes. Reinforced from all sides, the design allows you to hold a weight of up to 100 kg with one holder. Hooks for fastening the gutter on both sides make it possible to easily mount the system and, if necessary, replace the gutter without difficulty. It can be used at temperatures from -50 °C to +50 °C. In contrast to the metal, plastic holder of the drainage system, it can be used near salt water reservoirs or industrial enterprises without damage to the material. Mounted to the front board with 3 roofing screws. The distance between the holders should be no more than 50 cm or 20 cm to the edge of the front board. To prevent water stagnation in the system and to ensure effective drainage of rainwater, during installation work, you should organize the slope of the gutter in the direction of water discharge through the downspout. The slope should be 3-5 mm per 1 linear meter.