Ruflex ridge and eaves tile 17m ridge \ 21m eaves

Ruflex ridge and cornice tile 17m/21m

In order to provide maximum protection of eaves and ridges of the roof against increased loads exerted by wind, rain and snow on the roof of the house, ridge-eaves tiles were specially developed.

Characteristics of RUFLEX ridge-cornice tiles

BRAND Ruflex
The type of bitumen is elastomeric bitumen
Fiberglass base Covering area 21 p/m cornice or 17 p/m ridge
It is presented in the same series as ordinary RUFLEX tiles, but has an important difference: the shingle is made without petals and is larger in height. The width of the horse is 0.33 m, while the Finnish counterpart is 0.25 m.

Advantages of using RUFLEX tiles for ridges and eaves:

the installation process is significantly accelerated;

higher degree of waterproofing on the eaves;

less waste, as there is no need to cut a straight edge from ordinary tiles.
Features of the material:

we recommend using it as a starting strip when laying the main coating;

tiles are universal, they can be used to form a ridge and cornice;

allows you to create a beautiful roof, make the edges of the eaves smooth;

it is glued quickly and tightly thanks to the continuous self-adhesive layer from below;

ensures 100% tightness of the roof and protection against leakage and ingress of air;

withstands the pressure of snow and ice.
Terms of use:

The tile is intended for the formation of ridges and eaves, inclined ribs and front overhangs. A solid tile is used for the eaves; for the ridge, the sheet can be divided into 3 parts by perforation. It is desirable to mount in an overlap (width 5-7 cm).

Material consumption:

One package of RUFLEX ridge-eaves tiles is enough for:

21 m.hog. cornice

17 m.hog. a horse