Bitumen-rubber mastic "Universal" Oreol-1 10 kg
Product description
DSTU B V.2.7-108-2001
Material description:
Mastic is a completely ready-to-use material consisting of a mixture of petroleum bitumens modified with synthetic rubber, mineral fillers and an organic solvent. After drying, it forms a coating with a wide range of operating temperatures, which significantly increases the service life of the protected structures.
Method of application:
It is recommended to apply the mastic to the treated surface with brushes, a spatula or a pouring method with leveling.
The application temperature range is from -20°C to +40°C.
Before using the mastic, the working surface is treated with a primer.
At low ambient temperatures, for ease of application, it is recommended to keep the mastic in a warm room for at least 12 hours or dilute it with an organic solvent to the required consistency, but not more than 8% by weight.
Scope and average cost rates
Scope of use | Cost, kg/m2 |
|---|---|
| Arrangement of external waterproofing in 1 layer | 1.0-1.5 |
| Installation of new roofs (using a reinforcing layer of fiberglass or fiberglass mesh) | from 4.0 |
| Repair of old roofs (using a reinforcing layer of fiberglass or fiberglass mesh) | from 2.0 |
| Bonding bitumen roll materials* | 1.0-1.5 |
| Bonding polystyrene foam and roofing mineral wool* | 1.0-1.5 |
| Anti-corrosion protection of metal surfaces in 1 layer (applied in 1-2 layers) | 1.0 |
* - for horizontal surfaces.
Storage:
Store in a dry place, protected from direct sunlight, at a temperature of -20°C to +35°C. Warranty shelf life - 24 months.
Main physical and mechanical indicators
Indicator name | Mastic "Universal" |
|---|---|
| Conditional strength, kgf/cm2, not less than | 2.0 |
| Elongation at break, %, not less than | 100 |
| Shear strength of the adhesive joint, kgf / cm, not less | 2.0 |
| Bond strength between layers, kgf/cm2, not less than | 2.0 |
| Water resistance for 10 minutes at a pressure of 0.03 MPa | withstands |
| Flexibility on a bar with a radius of 5.0 ± 0.2 mm, at a temperature of °C | -15 |
| Adhesion strength to the base, kgf / cm2, not less than | 3.0 |
| Mass fraction of non-volatile substances, %, not less | 60 |
| Water absorption within 24 hours, % by mass, not more than | 0.2 |
| Heat resistance, °C, not less | +80 |
| Drying time, hours, no more | 24 |
Field of application:
- Roof repair and maintenance
- Waterproofing of foundations
- For waterproofing residential and public buildings
- Mineral priming is based on proper isolation
- Seamless waterproofing of vertical and horizontal surfaces
Advantages:
- Water-soluble, without organic solvents
- Resistant to weak acids and salts
- For external and internal use
- Ready to use, odorless
- Very high adhesion to the base
- It has thixotropic properties
- Does not react with EPS and XPS polystyrene, can be used together with materials that are not resistant to organic solvents and their vapors
- Easy to apply with a brush, brush or spray
Bitumen type | Bituminous |
Weight per sq.m. | 10 kg |
Guarantee | 10 years |
Unit of measurement | bucket |
Bituminous mixture | primer |
Country of manufacture | Ukraine |
Help other users with the choice - be the first to share your opinion about this product.