Polystyrene ek. SUMMER t-40 2x55x120 cm 21 pcs/pack
Plate PSE-t-40-20x550x1200
Extruded expanded polystyrene SYMMER XPS is a high-quality heat-insulating material. The high strength, stiffness and durability of SYMMER XPS plates allow them to be used in the insulation of underground parts of buildings, plaster facades, floors on the ground, flat roofs, foundations for highways, railway embankments and airfield runways. SYMMER XPS is economical and easy to install. Installation of SYMMER XPS products is possible under any weather conditions.
More than thermal insulation. SYMMER XPS is a high-quality thermal insulation material made of extruded polystyrene foam, which has one of the lowest coefficients of thermal conductivity among insulation materials widely used in construction, and also contains graphite. Due to its closed cellular structure, SYMMER XPS has high thermal insulation properties, does not absorb moisture and has high compressive strength.
Environmental friendliness. In the production of SYMMER XPS, carbon dioxide is used as a foaming agent. Thus, SYMMER XPS extruded polystyrene and its production technology are safe for humans and the environment.
Durability The closed porosity of SYMMER XPS excludes capillary phenomena, giving the slabs high frost resistance and excellent biological resistance, allowing the slabs to be used in direct contact with vegetation and groundwater for 50 years or more.
Optimum construction solutions. The high strength, rigidity and durability of SYMMER XPS plates allow them to be used for insulation of underground parts of buildings, plaster facades, floors on the ground, flat roofs, foundations for highways, railway embankments and airfield runways. SYMMER XPS is economical and easy to install. Installation of SYMMER XPS products is possible under any weather conditions.
Marking:
PSE - extruded styrene plate
D - the plate surface is smooth
T - the surface of the plate is sealed
F - milled slab with a "selected quarter" edge
For example, PSE-GF-40-30х550х1200 means that type 40 insulation is 30 mm thick, 550 mm wide, 1200 mm long with a smooth surface and a "selected quarter" edge
Technical characteristics
| Article | 000091834 |
| Thickness | 20 mm |
| Size | 1200*550 mm |
Insulation packaging | Plate |
Insulation density kg/sq.m. | 40 |
Material width | 0.55 m |
Product thickness | 20 mm |
Length | 1.2 m |
Unit of measurement | packaging |
Help other users with the choice - be the first to share your opinion about this product.
