Tortsevoy plastic profile

The end polycarbonate UP profile is intended for closing the end cavities of panels. In addition to the function of protecting cellular polycarbonate from the penetration of dust, moisture and insects, this profile gives the panels an aesthetic finish and acts as their decorative frame. The design of the profile provides for fixing the profile on the ends of the panels. The UP-profile is tightly "dressed" on the end of the panel and holds securely without slipping. As a rule, it does not require gluing or any other additional fastening. However, in the case of using a profile on the lower part of a panel used in a pitched or arched roof, it should be fixed with short self-tapping screws with press washers so that the profile does not tear off the panel when snow falls. Corresponding profiles are intended for different panel thicknesses - 4/6/8/10/16mm. The length of the profile, corresponding to the width of the panel, is 2.1 m