Metal profile PS-7 (1,235-1,190)

For many years, professional flooring or profiled sheet has become a reliable, aesthetic and high-quality material that is used in construction.

It is made of galvanized sheet metal or with a polymer coating, and the process consists in bending a certain type of "wave" on the sheet with a certain distance between them. The purpose of the profile can be determined by the letters in the name:

• "H" means that the material is intended for load-bearing structures, namely, it is used for roofs and load-bearing structures. It is distinguished by a high wave ("trapezium") and a large sheet thickness;
• "C" means "wall" and is used for the construction of fences, fences and walls of household buildings. It differs in low wave height and metal thickness;
• "NS" is a universal material that is suitable for all categories of construction.

The description of this item contains information about PS-8 profiled sheet. The appearance is shown below (colors may vary):

This material is mounted quickly and easily. For this, it is necessary to weld the frame (pipes for it can be purchased from us) and buy special self-tapping screws to match the color of the material.

It is better to choose a polymer coating for the profiled sheet, since it will last longer (less prone to corrosion), although often they just buy galvanized metal.

When choosing a galvanized roll, it is necessary to take into account the % of zinc in the coating - it should be at least 100mg/sq.m.

Sheet thickness depending on the metal producer (China, Ukraine, Germany, Czech Republic) can be:

• 0.3 mm;
• 0.4 mm;
• 0.45 mm;
• 0.5 mm and higher.

Get a more detailed consultation immediately from our technical specialists. We can also carry out the entire range of work on material selection, measurements and installation at the facility. Call!!!!