Gutter connector PROFiL 130 graphite

It is used to connect gutters between themselves. It is equipped with EPDM rubber seals 2 cm wide to ensure the tightness of the system at the joints. To improve the hydraulic characteristics of the chute and ensure greater durability of the system, the connector is equipped with an insert. The tab should be inserted under the bend of the back side of the gutter, and then the front side of the tab should be fixed under the "rib" protruding on the inner surface of the connector. The gutters must be fixed in the connectors in such a way that the distance between them is at least 6 cm (to compensate for the linear expansion of the gutter).