Mineral wool

Mineral wool it is made from molten glass, rocks or blast furnace slag. It has a fibrous structure. Fibers of different types of insulation differ in shape (corrugated, vertically layered, horizontally layered). It is resistant to high temperatures and the action of chemically active substances. It has high thermal insulation properties and excellent sound insulation. Thermal conductivity significantly depends on the density of the material.

The main varieties mineral wool.

1. Glass wool. It is made of glass fibers. It has special chemical resistance. Able to withstand temperatures up to 500 degrees.
2. Stone wool. It is often made from molten rock. Can withstand temperatures of no more than 300 degrees.
3. Slag wool. It is produced from blast furnace slag. Its properties are very similar to rock wool, but it can withstand temperatures up to 600 degrees.

The main advantages mineral wool:

1. Fire resistance. Does not melt or ignite even at very high temperatures. Prevents the spread of flame.
2. Resistance to fungi and other biological negatives.
3. Low thermal conductivity.
4. Suitable for warming wooden structures. The fibrous structure allows such buildings to "breathe" while retaining warmth.
5. The structure of the fibers is not destroyed by a sharp temperature drop.
6. Ease of installation (easily cut and attached)
7. Long service life. Over time, it does not change its size and shape and is not prone to shrinkage.
8. Buy mineral wool possible at an affordable price.
9. Protects the building from rodents.
10. Removes steam well and minimizes the formation of condensate.

Cons:

• It is able to absorb moisture, which significantly affects the ability to retain heat. It is necessary to take care of good waterproofing during installation.
• Certain safety requirements must be observed when working with this heater. The fragility of the fibers of this material leads to the fact that small particles can fall on the skin, which leads to severe irritation of the skin and itching. It is necessary to carry out work in protective clothing and avoid getting hit mineral wool in the lungs during inhalation. For this, it is enough to use a respirator. Protect your eyes better with special glasses.

Fields of application

Minvata in Odessa , as well as in other cities, is widely used in construction works as a heat-insulating material. Suitable for residential and industrial premises. Based on mineral board products such as slabs, mats and sandwich panels are produced. Mineral wool used for:

• Thermal insulation of structures of any architectural complexity. It is perfect for insulating the attic, roof, internal or external walls of the building.
• Isolation of equipment and pipelines.
• Sound insulation.
• Insulation of concrete structures and three-layer panels.
• Thermal insulation of ceilings, internal partitions and floors.

Mineral wool in Odessa

Mineral wool from different manufacturers may differ in composition, density, shape of blocks, etc it is not. This is due to the specification and purpose of the material. Each brand offers products that differ in one way or another in terms of properties. When choosing this product yourself, you should pay attention to:

1. Uniformity of structure and color. A quality product does not crumble or crumble.
2. Absence of deformations and delamination.
3. The price for minwata depends on the density of the insulation fibers. The cheaper the material, the lower its density, and therefore its thermal insulation properties.

If you decide buy cotton wool in Odessa we recommend contacting our consultants. Professionals will inform you about the features of each type of insulation, calculate the required amount of material for your building, and help you choose the most suitable coating for your requirements. And a wide assortment will allow you to make a choice among the products of the best manufacturers of heat-insulating materials.